A floating wind turbine is planned for 10
kilometers off Norway.
Wind sparring: This power platform designed by
Norway's StatoilHydro uses a spar buoy, a common technology in its offshore
oil and gas operations, to place a conventional wind turbine in waters
up to 700 meters deep--multiplying the sites available for offshore wind
parks. The company expects to be operating a full-scale device off Norway's
North Sea coast by next fall.
The notion of floating
wind turbines far offshore may have come a nautical mile closer to reality
late last month, with the announcement of a collaboration between Norwegian
oil and gas producer StatoilHydro and Germany's Siemens, a major wind-turbine
producer. The new partners plan to install what could be the world's first
commercial-scale wind turbine located offshore in deep water. StatoilHydro
has allocated 400 million NOK ($78 million) to floating a Siemens turbine
in more than 200 meters of water--10 times the depth that conventional
offshore wind-turbine foundations can handle--atop a conventional oil and
gas platform.
By fall of 2009, the
project aims to operate a 2.3-megawatt wind turbine in North Sea about
10 kilometers offshore from Karmøy on Norway's southwestern tip.
That power output is small compared with the 1,054 megawatts of offshore
wind installed in European waters by the end of last year. However, proving
deep offshore wind will ensure future growth by expanding the range of
wind power, according to Anne Strømmen Lycke, StatoilHydro's vice
president for wind power, who says that there are a declining number of
sites available onshore and in shallow waters. "Either it's full already,
or there's resistance or complicated terrain," says Lycke. "And
there are regions without a shallow shelf--California, Japan, Norway--where
shallow wind is not possible." |
At least two other firms
are also developing floating wind turbines. Both--Blue H of the Netherlands,
and Norway's Sway (itself one-quarter owned by StatoilHydro)--are designing
lighter wind turbines to slim down the heft and price tag of the platform
required to support them. But Paul Sclavounos, a mechanical engineer at
MIT whose lab is designing offshore platforms for wind turbines, has criticized
that innovation as misguided at this stage in the technology development,
given the complexity and cost of certifying a novel turbine design. In
contrast, the project planned by StatoilHydro and Siemens involves mature
technologies being implemented by industrial giants.
Indeed, StatoilHydro's
plan relies on a combination of well-tested components. A 165-meter-tall
spar buoy closely modeled after oil and gas production platforms used in
the Gulf of Mexico and elsewhere supports a standard, mass-produced Siemens
2.3-megawatt turbine. Lycke calls the turbine "very robust and very
well tested." That will simplify optimization of the floating-turbine
concept, she says, "because we know that we're only testing one thing:
whether the turbine behaves as predicted in the water."
The prediction from
wave pool testing of a scale model is that the turbine should handle life
on the waves just fine, thanks to three anchor chains holding the platform
stable and the relatively steady winds that prevail far from shore. "Onshore
wind turbines are exposed to quite a bit of turbulence and gusts, and that
is not the case at sea," says Lycke.
StatoilHydro plans to
lower the price of the floating turbine by running it for two years and
gathering the data needed to estimate the smallest anchor and buoy required
to support a wind turbine. Some additional cost will be defrayed by more
consistent winds that keep the turbines spinning more often and thus boosting
the megawatt hours of electricity generated by each turbine.
Lycke says that deepwater
wind power will be very pricey early on--closer to today's solar power
prices--and thus will need government incentives to take off. But she believes
that the economics could eventually rival those of conventional wind power.
"If we didn't think so," says Lycke, "there would be no point
in doing it." |